The fingerprint reader can work with GV-AS / GV-EV Controller and GV-ASManager to create a complete access control system. Three types of operation modes are supported: Card + Fingerprint, Fingerprint Only and Card Only.
FEATURES
Work with GV-AS / GV-EV Controller and GV-ASManager
Can be a standalone fingerprint reader
Three types of access modes: card only, fingerprint only and card plus fingerprint
Fingerprint templates stored on the user card
TCP/IP interface (WAN)
SPECIFICATIONS
Models
GV-GF1921
GV-GF1922
Application
Indoor use only
Communication Interface
TCP/IP (10/100 Mbps Ethernet, WAN)
Sensor
Capacitive
Optical
Sensing Area (H x W)
18 x 13 mm (0.71 x 0.51 in)
20 x 17 mm (0.79 x 0.67 in)
Operation Mode
Fingerprint Only, Card + Fingerprint, Card Only
Number of Fingerprints Stored
1,900 (for Fingerprint Only mode)
Supported Card
ISO14443A (, and ), 13.56 MHz
Output
DC 30V, 0.3A
Input
2 Ports, dry-contact
Power
DC 12V, Max 250mA
Operating Temperature
0~50° C (32~122° F)
Humidity
10%~90%
Dimensions (H x W x D)
48 x 59 x 138 mm (1.89 x 2.32 x 5.43 in)
Weight
130 g (0.29 lb)
160 g (0.35 lb)
Certification
CE, FCC
Note:
1. For data synchronization with GV-ASController and GV-ASManager through the Ethernet, it only supports the following controller firmware version and software version:
* GV-ASManager: V4.0 or later
*
GV-AS210 / 410 / 810: V1.1 or earlier
2. GV-GF1921 / 1922 do not support third-party controllers.
3. All specifications are subject to change without prior notice.
For Card + Fingerprint Mode, the GV-AS ID F Card or GV-AS ID F Tag is required. For Card Only Mode, both the GV-AS ID F Card / Tag and the GV-AS ID Card / Tag are supported.
