|
|
|
|
GV-IP Camera H.264 Version History:
(GV-BX110 & GV-MFD110 & GV-BL110 & GV-FE110/111 & GV-PTZ010D & GV-PT110D)
Firmware V1.08 2011-11-17
Firmware V1.08 includes the following GV-IP Camera models:
- GV-FE110 / 111
- GV-BX110D
- GV-MFD110
- GV-BL110D
- GV-PTZ010D
- GV-PT110D
New:
- Support for wide angle lens dewarping
- Support for GV-Backup Center, GV-Video Gateway and GV-Recording Server
- Support for QoS (DSCP)
- Support for RTSP audio option
- Support for HTTPS
- Support for SNMP
- Support for text overlay
- Support for database repair
- Support for automatic reboot
- Support for system log
Fixed:
- Incorrect frame rate setting after selecting different connection template (GV-PTZ010D)
- Incorrect resolution setting after selecting 3Gppv7 connection template (GV-PTZ010D)
- Excessive noise during night mode (GV-PT110D)
- Occasional failure of IR cut filter when switching from night mode to day mode (GV-PT110D)
- Inability to set resolution to half D1 when connecting through PSIA / RTSP (PTZ010D)
- Failure to update frame rate displayed on Web interface after the setting is modified (GV-FE110 / 111)
- Occasional error when using CGI command to obtain snapshot
- Occasional failure to send snapshot emails to multiple recipients
- Flickering image after enabling auto iris
- Occasional lagging in live view
- Failure to display image when connecting to Milestone NVR through PSIA
- Inability to resume connection after PPPOE disconnection
- Inability to display Celsius temperature in VSM
- Failure to update temperature every 5 seconds on Web interface
- Failure to save changes made to settings on Web interface under Japanese OS
- Failure to format SD card
- Remote ViewLog failure when accessing corrupted files
Modified:
- Day/Night function using image sensor instead of light sensor (GV-PT110D)
- Now logging out of web interface after rebooting
Firmware V1.07 2010-10-15
Note:
The BX110 series firmware V1.07 includes the following models:
- GV-BX110D (GV-IPCAM H.264 1.3M, Box Camera)
- GV-MFD110 (GV-IPCAM H.264 1.3M, Mini Fixed Dome)
- GV-BL110D (GV-IPCAM H.264 1.3M, Bullet Camera)
- GV-PTZ010D-NTSC (GV-IPCAM H.264 10x Optical Zoom, D1, PTZ Camera)- New model!
- GV-PTZ010D-PAL (GV-IPCAM H.264 10x Optical Zoom, D1, PTZ Camera)-New model!
- GV-PT110D (GV-IPCAM H.264 1.3M, PT Camera)- New model!
New:
- Support for new models GV-PT110D, PTZ010D-N and PTZ010D-P
- Support for PSIA protocol
- Support for software watchdog
- Support for 4:3 video resolutions, including 1280 x 960, 640 x 512 and 320 x 256, in GV-BX110D, GV-MFD110 and GV-BL110D
- Display of camera inside temperature on both the Web interface and GV-IP Utility for GV-BL110D, GV-PT110D, GV-PTZ010D-N and GV-PTZ010D-P
Fixed:
- Improper functioning of contrast settings when changing the settings on the connected GV-System
- System errors that occurred when the micro SD card was inserted before system boot-up
- Failure of Tempering Alarm function to trigger e-mail alert
- Failure of I/O Schedule function to trigger recording
Modified:
- Image quality of GV-MFD110 when being used to survey outdoor scenes
- VBR quality levels in which more levels are available
- VBR bit rate in which maximum bit rate is now open for configuration
Changed:
- Removal of 176 x 144 resolution for 3GPP connection
- Removal of Special Day function from Center V2, VSM and Backup Center setting pages
- Not support for D1 and Half D1 in RTSP streaming
Firmware V1.05 2010-07-16
New:
- Support for GV-Bullet Camera (GV-BL110D)
- Support for RTSP protocol
Fixed:
- Issue of enabling Auto Iris on the lens
- Failure to update IP address to DynDNS after network was broken or the GV-IPCAM H.264 was restarted
- Issue of incorrect Daylight Saving Time
- Recording issue that occurred when the storage device was removed during recording process
- Recording issue that occurred when the Live View was closed and then opened again
- Database issue that caused the GV-IPCAM H.264 to restart
- Issue of motion detection recording after the GV-IPCAM H.264 was restarted
- Issue of audio recording which was activated with I/O monitoring even though you did not enable audio recording
Modified:
- Improvement of image bit rate and recording file size
- Update time of Network Time Server now definable
- Change of default audio volume for Microphone function
Firmware V1.04 2010-05-26
New:
- Support for GV-NVR System Lite for automatic codec and resolution setup of live view
Modified:
- Modified the default values of brightness, contrast, saturation, sharpness and gamma
Fixed:
- Insufficient image brightness when the shutter speed was set to be 鈥淎uto (Low Light, Quality)鈥�
- Wrong Status LED lighting status after GV-IPCAM H.264 was started
- Incorrect display of Czech characters on the Web interface
- Failure to update IP address to DynDNS if network has been broken or the GV-IP Camera has been restarted
Firmware V1.03 2010-04-09
Fixed:
- Incorrect default codec setting
- Reset default can't influence motion zone
Firmware V1.02 2010-03-31
Modified:
- Added two more options for GOP setting: 3 and 6 frames
Fixed:
- Flicker issue when the VGA or CIF resolution was applied under the fluorescent lamps without electronic ballasts
- Issue of random reboots when the video was recorded to the SD Card directly
- Issue of recycling events
- Incorrect status display of firmware upgrade when using IP Device Utility
- Failure to format the Micro SD Card with the capacity of more than 8 GB
- Failure to play the input-triggered recordings through Remote ViewLog
Firmware V1.01 2010-02-12
New:
- Support GV-Mini Fixed Dome(GV-MFD110)
Modified:
- Update switch night / day mode switch value
Fixed:
- Incorrect MAC Address that appeared on the Web interface when using PPPoE connection
- Web interface crash on Windows 7 that occurred when using PIP or PAP function
|
|
|
|
